Last Chance to Speak at Open Source Summit and ELC + OpenIoT Summit Europe – Submit by July 1



  • Open Source Summit

    Join us in Edinburgh! Submit a proposal to speak by July 1 for Open Source Summit & ELC + OpenIoT Summit Europe.

    Submit a proposal to speak at Open Source Summit Europe & ELC + OpenIoT Summit Europe, taking place October 22-24, 2018, in Edinburgh, UK, and share your knowledge and expertise with 2,000+ open source technologists and community leaders. Proposals are being accepted through 11:59pm PDT, Sunday, July 1.

    This year’s tracks and content will cover the following areas at Open Source Summit Europe:

    • Cloud Native Apps/Serverless/Microservices
    • Infrastructure & Automation (Cloud/Cloud Native/DevOps)
    • Linux Systems
    • Artificial Intelligence & Data Analytics
    • Emerging Technologies & Wildcard (Networking, Edge, IoT, Hardware, Blockchain)
    • Community, Compliance, Governance, Culture, Open Source Program Management (Open Collaboration Conference track)
    • Diversity & Inclusion (Diversity Empowerment Summit)
    • Innovation at Apache/Apache Projects
    • TODO / Open Source Program Management

    View the full list of suggested topics for Open Source Summit Europe.

    Suggested Embedded Linux Conference (ELC) Topics:

    • Audio, Video, Streaming Media and Graphics
    • Security
    • System Size, Boot Speed
    • Real-Time Linux – Performance, Tuning and Mainlining
    • SDKs for Embedded Products
    • Flash Memory Devices and Filesystems
    • Build Systems, Embedded Distributions and Development Tools
    • Linux in Devices such as Mobile Phones, DVRs, TVs, Cameras, etc
    • Use of Linux in Automotive
    • Drones and Robots
    • Linux in the Internet of Things
    • Practical Experiences and War Stories
    • Standards
    • Public Infrastructure
    • Industrial Automation

    This year’s tracks and content will cover the following areas at ELC:

    Suggested OpenIoT Summit Topics:

    • Real-Time OS (Zephyr, RIOT, MyNewt, FreeRTOS, NuttX, mbed and Others)
    • Outside World Meets IoT (Sensor Interaction, Low Footprint, Connected Sensors, EMF/RFI Impact)
    • Bootloaders, Firmware & Updates
    • Containers
    • Distributed Edge
    • Application Technologies
    • On-device Analytics
    • Blockchain for Constrained Devices
    • Device Management
    • Power Management
    • Configuration Management
    • Developing for Security
    • Safety Considerations
    • Certifications – Lessons Learned Taking Devices to Product

    View the full list of suggested topics for ELC + OpenIoT Summit Europe.

    SUBMIT FOR OPEN SOURCE SUMMIT EUROPE »SUBMIT FOR ELC + OPENIOT SUMMIT EUROPE »

    Sign up to receive updates on Open Source Summit Europe and ELC + OpenIoT Summit Europe:

    Register & Save

    Not submitting, but plan to attend? Register before August 18 and save $300 with early bird pricing. One registration gets you access to both Open Source Summit Europe & ELC + OpenIoT Summit Europe.

    Interested in Sponsoring?

    Showcase your thought leadership among a vibrant open source community and connect with top influencers driving today’s technology purchasing decisions. Learn how to become a sponsor of Open Source Summit Europe or ELC + OpenIoT Summit Europe.

    The post Last Chance to Speak at Open Source Summit and ELC + OpenIoT Summit Europe – Submit by July 1 appeared first on The Linux Foundation.

    https://www.linuxfoundation.org/blog/last-chance-to-speak-at-open-source-summit-and-elc-openiot-summit-europe-submit-by-july-1/





Tmux Commands

screen and tmux

A comparison of the features (or more-so just a table of notes for accessing some of those features) for GNU screen and BSD-licensed tmux.

The formatting here is simple enough to understand (I would hope). ^ means ctrl+, so ^x is ctrl+x. M- means meta (generally left-alt or escape)+, so M-x is left-alt+x

It should be noted that this is no where near a full feature-set of either group. This - being a cheat-sheet - is just to point out the most very basic features to get you on the road.

Trust the developers and manpage writers more than me. This document is originally from 2009 when tmux was still new - since then both of these programs have had many updates and features added (not all of which have been dutifully noted here).

Action tmux screen
start a new session tmux OR
tmux new OR
tmux new-session
screen
re-attach a detached session tmux attach OR
tmux attach-session
screen-r
re-attach an attached session (detaching it from elsewhere) tmux attach -d OR
tmux attach-session -d
screen -dr
re-attach an attached session (keeping it attached elsewhere) tmux attach OR
tmux attach-session
screen -x
detach from currently attached session ^b d OR
^b :detach
^a ^d OR
^a :detach
rename-window to newname ^b , <newname> OR
^b :rename-window <newn>
^a A <newname>
list windows ^b w ^a w
list windows in chooseable menu ^a "
go to window # ^b # ^a #
go to last-active window ^b l ^a ^a
go to next window ^b n ^a n
go to previous window ^b p ^a p
see keybindings ^b ? ^a ?
list sessions ^b s OR
tmux ls OR
tmux list-sessions
screen -ls
toggle visual bell ^a ^g
create another window ^b c ^a c
exit current shell/window ^d ^d
split window/pane horizontally ^b " ^a S
split window/pane vertically ^b % ^a |
switch to other pane ^b o ^a <tab>
kill the current pane ^b x OR (logout/^D)
collapse the current pane/split (but leave processes running) ^a X
cycle location of panes ^b ^o
swap current pane with previous ^b {
swap current pane with next ^b }
show time ^b t
show numeric values of panes ^b q
toggle zoom-state of current pane (maximize/return current pane) ^b z
break the current pane out of its window (to form new window) ^b !
re-arrange current panels within same window (different layouts) ^b [space]
Kill the current window (and all panes within) ^b killw [target-window]
  • sort -g /var/log/nginx/access.log | awk '{print $1}' | uniq

    read more
  • Make ISO from DVD

    In this case I had an OS install disk which was required to be on a virtual node with no optical drive, so I needed to transfer an image to the server to create a VM

    Find out which device the DVD is:

    lsblk

    Output:

    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 1G 0 part /boot └─sda2 8:2 0 464.8G 0 part ├─centos-root 253:0 0 50G 0 lvm / ├─centos-swap 253:1 0 11.8G 0 lvm [SWAP] └─centos-home 253:2 0 403G 0 lvm /home sdb 8:16 1 14.5G 0 disk /mnt sr0 11:0 1 4.1G 0 rom /run/media/rick/CCSA_X64FRE_EN-US_DV5

    Therefore /dev/sr0 is the location , or disk to be made into an ISO

    I prefer simplicity, and sometimes deal with the fallout after the fact, however Ive repeated this countless times with success.

    dd if=/dev/sr0 of=win10.iso

    Where if=Input file and of=output file

    I chill out and do something else while the image is being copied/created, and the final output:

    8555456+0 records in 8555456+0 records out 4380393472 bytes (4.4 GB) copied, 331.937 s, 13.2 MB/s

    Fin!

    read more
});